While the MHz shift will be kHz; on 70 cm, the shift may be 1. Enter the transmit and receive fre- quencies separately, as shown on page This helps prevent false activation of the repeater by radar or spurious signals from other transmitters. Page Tone Search Scanning When this happens, it may be that the other station is not sending any tone. Page Memory Operation This will not cause transmission; instead, it signals the microprocessor that a separate transmit frequency is being programmed into that memory register.
Page Deleting Memories 3. Page Memory Only Mode 3. To return to normal operation, repeat the above steps. It will halt on signals encountered, so you can talk to the station s on that frequency, if you like. Page Vfo Scanning 7. If you want to change direction of the scan while it is underway, rotate the DIAL knob one click in the opposite direction in this case, one click counter- clockwise. Page Memory Scanning 7. You therefore can set upper and lower operation limits on a number of bands, if you like.
When the Memory Bank feature is activated, the FTR will check the lowest memory channel in the Memory Bank as the priority channel. Page 51 7. Press and hold in the [ S. Page Arts Polling Time Options 4. Page Cw Identifier Setup Page 55 FTR O These DTMF Autodialer memories can store up to 16 digits of a telephone number for repeater autopatch or other uses. Page 57 ms. Page 59 Internet link repeater. Page Miscellaneous Settings 4.
King Yaesu - Yaesu Radio Software. This is a small utility I wrote to test the interface cables used to program Yaesu and Icom radios it will not work with cables for other radios.
Any memory channel with all its details can be sent to the radio with a simple keystroke. Or, you can read from the radio, store these details on your computer and make changes. Then, with minimal button pushing, send the new configuration back to the radio. The Programmer allows you to create and save as many files as you want for your radio. Files can even be shared between users via email or the Internet.
Any RT Systems Version 4. Managing all the options of this great little radio becomes easy with the Programmer. The cut, copy, paste and insert features of the Programmer make channel management easier than ever. Open more than one file at a time. Memory channel information can be copied from one file to another within the Programmer making it really easy to set up a new file.
Use these screens to customize other set menu features of the radio. Use these screens to customize other set menu features of the radio. Check boxes toggle features on or off, drop down menus list all selections and blank boxes for personalized entry add to the ease of setting up your radio exactly like you want it.
Once settings are customized, you are prompted to save before exiting. The saved settings will be there every time you create a new frequency file. Share this resource Share this link with your friends, publish within popular social networks or send it via email. The DXZone is the largest human created and maintained library of web sites dedicated to Amateur Radio, currently lists Real Hams review new sites every day since , for potential inclusion in the Directory, and to evaluate the best place to list them.
Program the same details for Limit Memories as for regular memory channels. Many of the Limit Memories are preprogrammed in the radio and while the frequency can be changed to another within the band, they cannot be left blank.
These channels are preprogrammed in the radio and while the frequency can be changed to another within the band, they cannot be left blank.
Also what the last year it was produced. View the manual for the Yaesu FT here, for free. This manual comes under the category Not categorized and has been rated by 5 people with an average of a 7. This manual is available in the following languages: English. Below, you will find the most frequently asked questions about the Yaesu FT Is your question not listed?
0コメント